Device Parameters and Graphics Options Listed by Product
SAS/GRAPH
|
Name
|
Syntax and Description
|
|---|---|
|
ASPECT=scaling-factor
Sets the aspect ratio for graphics elements.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
CHARTYPE=hardware-font-chartype
Selects the number of the default hardware character
set.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
DEVMAP=device-map-name | NONE
Specifies the device map to be used when device-resident
fonts are used.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
DRVINIT1='system-command(s)'
DRVINIT2='system-command(s)'
Specifies host commands to be executed before driver
initialization.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
DRVTERM1='system-command(s)'
DRVTERM2='system-command(s)'
Specifies host commands to be executed after the
driver terminates.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
FILECLOSE=DRIVERTERM | GRAPHEND
Controls when the graphics stream file (GSF) is
closed when you are using the device driver to send graphics output
to a hard copy device.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
FILLINC=0 – 9999
Specifies the number of pixels to move before drawing
the next line in a software fill of a solid area.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GACCESS=output-format | 'output-format destination'
Specifies the format or the destination or both
of graphics data written to a traditional SAS/GRAPH device driver
or to a graphics stream file (GSF).
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GEND='string' <'string-n'>
Appends an ASCII string to every graphics data record
that is sent to a device or file.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GEPILOG='string' <'string-n'>
Sends a string to a device or file after all graphics
commands are sent.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GPROLOG='string' <'string-n'>
Sends a string to device or file before graphics
commands are sent.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GPROTOCOL=module-name
Specifies the protocol module to use when routing
output directly to a printer or creating a graphics stream file (GSF)
to send to a device attached to your host by a protocol converter.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GSFLEN=record-length
Controls the length of records written to the graphics
stream file (GSF).
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GSFMODE=APPEND | PORT | REPLACE
Specifies the disposition of records written to
a graphics stream file (GSF) or to a device or communications port
by the device driver.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GSFNAME=fileref
Specifies the fileref of the file or aggregate file
location to which graphics stream file records are written.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GSIZE=lines
Sets the number of lines of display used for graphics
for devices whose displays can be divided into graphics and text areas.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
GSTART='string' <'string-n'>
Prefixes every record of graphics data sent to a
device or file with a string of characters.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
HANDSHAKE=HARDWARE | NONE | SOFTWARE | XONXOFF
Specifies the type of flow control used to regulate
the flow of data to a hard copy device.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
HORIGIN=horizontal-offset<IN | CM | PT>
Sets the horizontal offset from the lower left corner
of the display area to the lower left corner of the graph.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
HSIZE=horizontal-size<IN | CM | PT>
Sets the horizontal size of the graphics output
area.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
LFACTOR=line-thickness-factor
Selects the default hardware line thickness.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
PAPERFEED=feed-increment<IN | CM>
Specifies the increment of paper that is ejected
when a graph is completed.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
POSTGRAPH1='system-command(s)'
POSTGRAPH2='system-command(s)'
Specifies host commands to be executed after the
graph is produced.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
PREGRAPH1='system-command(s)'
PREGRAPH2='system-command(s)'
Specifies host commands to be executed before the
graph is produced.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
PROMPTCHARS='prompt-chars-hex-string'X
Selects the prompt characters to be used by SAS/GRAPH
device drivers.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
REPAINT=redraw-factor
Specifies how many times to redraw the graph.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
ROTATE=LANDSCAPE | PORTRAIT
Specifies whether and how to rotate the graph.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
SPEED=pen-speed
Selects pen speed for plotters with variable speed
selection.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
TRANTAB=table | user-defined-table
Selects a translate table for your system that performs
ASCII-to-EBCDIC translation.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
UCC='control-characters-hex-string'X
Sets the user-defined control characters for the
device.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
VORIGIN=vertical-offset<IN | CM | PT>
Sets the vertical offset from the lower left corner
of the display area to the lower left corner of the graph.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
VSIZE=vertical-size<IN | CM | PT>
Sets the vertical size of the graphics output area.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
XMAX=width<IN | CM | PT>
Specifies the width of the addressable graphics
display area; affects the horizontal resolution of the device and
the horizontal dimension of the graphics output area.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
XPIXELS=width-in-pixels
Specifies the width of the addressable display area
in pixels and in conjunction with XMAX determines the horizontal resolution
for the device.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
YMAX=height<IN | CM | PT>
Specifies the height of the addressable graphics
display area; affects the vertical resolution of the device and the
vertical dimension of the graphics output area.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
| |
|
YPIXELS=height-in-pixels
Specifies the height of the addressable display
area in pixels and in conjunction with YMAX determines the horizontal
resolution for the device.
Product: SAS/GRAPH
Document: SAS/GRAPH: Reference for SAS Viya Workbench
|
Last updated: September 24, 2026