Azure storage account name

Application ID for Azure storage

DNS Suffix for Azure storage

Azure storage file system

Azure storage operation timeout value in seconds

specifies the authentication domain that is used to retrieve database credentials.

when set to TRUE, data is written to Google BigQuery using the Go Loader.Run function.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the default directory on the local node where data files are written. Defaults to SAS utility directory.

when set to TRUE (the default), all local data files as well as S3 objects are deleted after the COPY command completes.

specifies a column delimiter for the data file. Either a single ASCII character or an octal sequence.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies an alternate project ID to be used in table references in SQL queries

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the password.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

specifies a name for the trace file.

specifies flags to use for tracing the database connection.

specifies the user name.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the incoming data buffer size, in bytes.

Specifies whether Bulk Loading should be used for inserting rows.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the maximum length for STRING data type columns. For Hive, this parameter does not apply to CHAR or VARCHAR columns.

specifies the path to an HDFS directory that will be used to store the data when saving a Cloud Analytic Services table.

specifies the path to an HDFS directory that contains XML-based table definitions, called SASHDMD descriptors.

specifies the Hadoop HDFS directory to use to store temporary data.

specifies the number of rows to insert in one write block.

Specifies the login time-out in seconds for connecting to the data source.

Specifies the maximum number of threads to use to save a table.

specifies a multiplier value to be used with multi-byte encoded character variables. Specify a value larger than the default to avoid character data truncation. Specify a value smaller than the default to conserve storage for data that doesn't require the maximum bytes. The byte lengths are calculated by multiplying the character length by the specified value.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

Specifies additional database-specific options to be placed after the table name in a CREATE TABLE statement.

Specifies additional database-specific options to be placed before the table name in a CREATE TABLE statement.

specifies the password.

specifies the number of rows to read in one read block.

specifies the name of the Hive schema.

specifies the interval for status messages to display to the console during a table load. When the specified number of incoming data buffers are added to the table, a message is displayed.

specifies the user name.

specifies the authentication domain that is used to retrieve database credentials.

specifies the incoming data buffer size, in bytes.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies connection options to use for connecting to the database.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

Specifies the maximum number of threads to use to save a table.

specifies a multiplier value to be used with multi-byte encoded character variables. Specify a value larger than the default to avoid character data truncation. Specify a value smaller than the default to conserve storage for data that doesn't require the maximum bytes. The byte lengths are calculated by multiplying the character length by the specified value.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the interval for status messages to display to the console during a table load. When the specified number of incoming data buffers are added to the table, a message is displayed.

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of seconds to wait for a connection attempt before returning an error.

specifies the number of seconds to wait for a query to finish executing before returning an error.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the AWS configuration file if different from the default.

specifies any additional COPY options that are added to the end of the COPY command.

specifies the S3 bucket name (and subdirectory, if applicable) to write data files.

when set to TRUE, data is written to Redshift using the COPY command.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

when set to TRUE, use GZIP compression on data files.

specifies the AWS credentials file to use.

specifies the AWS profile name in the AWS credentials file to use if using an account with multiple profiles.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the default directory on the local node where data files are written. Defaults to SAS utility directory.

when set to TRUE (the default), all local data files as well as S3 objects are deleted after the COPY command completes.

specifies a column delimiter for the data file. Either a single ASCII character or an octal sequence.

when set to TRUE, any restricted characters in string data are escaped to allow processing with COPY.

specifies the number of rows to insert in one write block.

specifies the Amazon Web Services access key that is used with key-based access control.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the AWS profile to use if using an account with multiple profiles.

specifies the Amazon Web Services region that the Redshift server resides for bulk-load.

specifies an optional S3 configuration file

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

specifies the Amazon Web Services secret access key that is used with key-based access control.

specifies a temporary token that is associated with the temporary credentials that you specify with the secret and key options.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

when set to TRUE, create an SSL connection to S3 when transmitting data files.

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the AWS configuration file if different from the default.

specifies any additional COPY options that are added to the end of the COPY command.

specifies the S3 bucket name (and subdirectory, if applicable) to write data files.

when set to TRUE, data is written to Snowflake using the COPY INTO command.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

when set to TRUE, use GZIP compression on data files.

specifies the AWS credentials file to use.

specifies the AWS profile name in the AWS credentials file to use if using an account with multiple profiles.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the default directory on the local node where data files are written. Defaults to SAS utility directory.

when set to TRUE (the default), all local data files as well as S3 objects are deleted after the COPY command completes.

specifies a column delimiter for the data file. Either a single ASCII character or an octal sequence.

when set to TRUE, any restricted characters in string data are escaped to allow processing with COPY.

specifies the number of rows to insert in one write block.

specifies the Amazon Web Services access key that is used with key-based access control.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the AWS profile to use if using an account with multiple profiles.

specifies the Amazon Web Services region that the Snowflake server resides for bulk-load.

specifies an optional S3 configuration file

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

specifies the Amazon Web Services secret access key that is used with key-based access control.

specifies the internal stage including path to use for bulk-load.

specifies a temporary token that is associated with the temporary credentials that you specify with the secret and key options.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

when set to TRUE, create an SSL connection to S3 when transmitting data files.

specifies the authentication domain that is used to retrieve database credentials.

specifies the incoming data buffer size, in bytes.

Specifies whether Bulk Loading should be used for inserting rows.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the maximum length for STRING data type columns. For Hive, this parameter does not apply to CHAR or VARCHAR columns.

specifies the path to an HDFS directory that will be used to store the data when saving a Cloud Analytic Services table.

specifies the path to an HDFS directory that contains XML-based table definitions, called SASHDMD descriptors.

specifies the Hadoop HDFS directory to use to store temporary data.

specifies the number of rows to insert in one write block.

Specifies the login time-out in seconds for connecting to the data source.

Specifies the maximum number of threads to use to save a table.

specifies a multiplier value to be used with multi-byte encoded character variables. Specify a value larger than the default to avoid character data truncation. Specify a value smaller than the default to conserve storage for data that doesn't require the maximum bytes. The byte lengths are calculated by multiplying the character length by the specified value.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

Specifies additional database-specific options to be placed after the table name in a CREATE TABLE statement.

Specifies additional database-specific options to be placed before the table name in a CREATE TABLE statement.

specifies the password.

specifies the number of rows to read in one read block.

specifies the name of the Hive schema.

specifies the interval for status messages to display to the console during a table load. When the specified number of incoming data buffers are added to the table, a message is displayed.

specifies the user name.

specifies the password to use for Alter access.

specifies the authentication domain that is used to retrieve database credentials.

specifies the incoming data buffer size, in bytes.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies the path to place data files for created SPDE tables.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the passphrase used for an AES encrypted data set.

specifies the Hadoop HDFS directory to use to store temporary data.

specifies a label to apply to the output data set.

specifies the master password to use for Read/Write/Alter access.

Specifies the maximum number of threads to use to save a table.

specifies the path where SPDE MDF are located.

specifies a multiplier value to be used with multi-byte encoded character variables. Specify a value larger than the default to avoid character data truncation. Specify a value smaller than the default to conserve storage for data that doesn't require the maximum bytes. The byte lengths are calculated by multiplying the character length by the specified value.

specifies the number of write buffers to use for the pipeline write.

specifies the size of additional padding to allow for compressed SPDE tables. This enables subsequent updates to perform more efficiently.

specifies the partition size (in number of MBs) to use for created SPDE tables.

specifies the password.

specifies the password to use for Read access.

specifies the interval for status messages to display to the console during a table load. When the specified number of incoming data buffers are added to the table, a message is displayed.

specifies the user name.

specifies the password to use for Write access.

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the incoming data buffer size, in bytes.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies connection options to use for connecting to the Teradata database.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies a Teradata Max Text Size value in chars.

specifies the number of rows to insert in one write block.

Specifies the maximum number of threads to use to save a table.

specifies a multiplier value to be used with multi-byte encoded character variables. Specify a value larger than the default to avoid character data truncation. Specify a value smaller than the default to conserve storage for data that doesn't require the maximum bytes. The byte lengths are calculated by multiplying the character length by the specified value.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the password.

Unused

specifies the interval for status messages to display to the console during a table load. When the specified number of incoming data buffers are added to the table, a message is displayed.

specifies the user name.

specifies the name for a collection of data that is stored with a common encryption password.

specifies a password for encrypting or decrypting stored data.

specifies the name for a collection of data that is stored with a common encryption password.

specifies a password for encrypting or decrypting stored data.

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the name for a collection of data that is stored with a common encryption password.

specifies a password for encrypting or decrypting stored data.

specifies the AWS Key Management Services encryption context for the cryptographic operation.

specifies the AWS Key Management Services ID.

specifies an encryption key in the form of a 64-digit hexadecimal value.

specifies a plain-text version of the key to use with server-side encryption.

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

when set to True, applies data compression to the table.

specifies file encoding

specifies whether to encrypt an output SAS data set

specifies a password for encrypting or decrypting stored data.

specifies the password for a password-protected data set. Use this parameter if the data set is password-protected or uses SAS proprietary encryption.

specifies whether SAS creates compressed data sets whose observations can be randomly accessed or sequentially accessed

specifies the Read password for the SAS data set.

specifies whether new rows can be written to freed space in a compressed SAS data set

when set to True, the file includes a byte-order mark (BOM) at the beginning of the file. The BOM can help programs such as Microsoft Excel to interpret national characters in text fields correctly. By default, the BOM is not added to the file.

specifies a subset of the cells to import. For example, the range B2..E8 is the range address for a rectangular block of 12 cells, where the top left cell is B2 and the bottom right cell is E8.

specifies the name of the worksheet to import.

when set to True, applies data compression to the table.

specifies a subset of the cells to import. For example, the range B2..E8 is the range address for a rectangular block of 12 cells, where the top left cell is B2 and the bottom right cell is E8.

specifies the name of the worksheet to import.

Azure storage account name

Application ID for Azure storage

DNS Suffix for Azure storage

Azure storage file system

Azure storage operation timeout value in seconds

specifies the authentication domain that is used to retrieve database credentials.

when set to TRUE, data is written to Google BigQuery using the Go Loader.Run function.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the default directory on the local node where data files are written. Defaults to SAS utility directory.

when set to TRUE (the default), all local data files as well as S3 objects are deleted after the COPY command completes.

specifies a column delimiter for the data file. Either a single ASCII character or an octal sequence.

specifies the number of rows to insert in one write block.

specifies the number of grid nodes that will connect to and write data to the DBMS during a Save action.

specifies an alternate project ID to be used in table references in SQL queries

specifies the schema so that you can use to fully qualify objects in another database for SQL processing.

when set to TRUE, the data connector creates narrow character types(CHAR and VARCHAR) during a Save action. The default of FALSE creates wide character types(NCHAR and NVARCHAR).

specifies the authentication domain that is used to retrieve database credentials.

specifies the database catalog name.

specifies a multiplier value to expand single-byte encoded character variables to avoid character data truncation. The lengths are increased by multiplying the character length by the specified value.

specifies database-specific CREATE TABLE options that will be appended to the generated CREATE TABLE statement.

specifies the number of rows to insert in one write block.