Graph-Based Semisupervised Learning Action Set
Provides actions for graph-based semisupervised learning
labelSpread Action
Provides actions for semisupervised learning. DEPRECATION NOTICE: The labelSpread action has been deprecated beginning with the 2025.09 release.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterlabeledTable |
— |
specifies the labeled input data table, which contains the labeled data observations. |
|
required parametertable |
— |
specifies the settings for an input table. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parametercasOut |
specifies the prediction results for semi-supervised learning. |
Parameter Descriptions
attributes={{casinvardesc-1} <, {casinvardesc-2}, ...>}
alters attributes on variables used in this action.
For more information about specifying the attributes parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | attribute |
|---|
freq="variable-name"
Specifies the variable for the freq parameter
gamma=double
specified the inverse of variance for Gaussian kernels, which computes the similarity between pairs of data samples.
| Default | 20 |
|---|---|
| Minimum value (exclusive) | 0 |
inputs={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies variables to use for analysis.
For more information about specifying the inputs parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | input |
|---|
k=integer
specified the number of nearest neighbors used.
| Default | 1 |
|---|---|
| Minimum value (exclusive) | 0 |
* labeledTable={castable}
specifies the labeled input data table, which contains the labeled data observations.
| Long form | labeledTable={name="table-name"} |
|---|---|
| Shortcut form | labeledTable="table-name" |
| Alias | labels |
|---|
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
maxIters=integer
specifies the maximum number iterations.
| Alias | maxIter |
|---|---|
| Default | 3 |
nominals={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies nominal variables to use for analysis.
For more information about specifying the nominals parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | nominal |
|---|
outLabelProb=TRUE | FALSE
specifies the output data table to restore the label distributions
| Default | FALSE |
|---|
output={outputStatement}
specifies the prediction results for semi-supervised learning.
For more information about specifying the output parameter, see the common outputStatement parameter (Appendix A: Common Parameters).
* table={castable}
specifies the settings for an input table.
| Long form | table={name="table-name"} |
|---|---|
| Shortcut form | table="table-name" |
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
target="variable-name"
specifies target variable to use for analysis.
weight="variable-name"
Specifies the variable for the weight parameter
labelSpread Action
Provides actions for semisupervised learning. DEPRECATION NOTICE: The labelSpread action has been deprecated beginning with the 2025.09 release.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterlabeledTable |
— |
specifies the labeled input data table, which contains the labeled data observations. |
|
required parametertable |
— |
specifies the settings for an input table. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parametercasOut |
specifies the prediction results for semi-supervised learning. |
Parameter Descriptions
attributes={{casinvardesc-1} <, {casinvardesc-2}, ...>}
alters attributes on variables used in this action.
For more information about specifying the attributes parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | attribute |
|---|
freq="variable-name"
Specifies the variable for the freq parameter
gamma=double
specified the inverse of variance for Gaussian kernels, which computes the similarity between pairs of data samples.
| Default | 20 |
|---|---|
| Minimum value (exclusive) | 0 |
inputs={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies variables to use for analysis.
For more information about specifying the inputs parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | input |
|---|
k=integer
specified the number of nearest neighbors used.
| Default | 1 |
|---|---|
| Minimum value (exclusive) | 0 |
* labeledTable={castable}
specifies the labeled input data table, which contains the labeled data observations.
| Long form | labeledTable={name="table-name"} |
|---|---|
| Shortcut form | labeledTable="table-name" |
| Alias | labels |
|---|
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=true | false
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | false |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the input table.
singlePass=true | false
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | false |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
maxIters=integer
specifies the maximum number iterations.
| Alias | maxIter |
|---|---|
| Default | 3 |
nominals={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies nominal variables to use for analysis.
For more information about specifying the nominals parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | nominal |
|---|
outLabelProb=true | false
specifies the output data table to restore the label distributions
| Default | false |
|---|
output={outputStatement}
specifies the prediction results for semi-supervised learning.
For more information about specifying the output parameter, see the common outputStatement parameter (Appendix A: Common Parameters).
* table={castable}
specifies the settings for an input table.
| Long form | table={name="table-name"} |
|---|---|
| Shortcut form | table="table-name" |
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=true | false
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | false |
computedVars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions={key-1=any-list-or-data-type-1 <, key-2=any-list-or-data-type-2, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the input table.
singlePass=true | false
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | false |
|---|
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable={groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions={adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
importOptions={fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the filter table.
vars={{casinvardesc-1} <, {casinvardesc-2}, ...>}
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
target="variable-name"
specifies target variable to use for analysis.
weight="variable-name"
Specifies the variable for the weight parameter
labelSpread Action
Provides actions for semisupervised learning. DEPRECATION NOTICE: The labelSpread action has been deprecated beginning with the 2025.09 release.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterlabeledTable |
— |
specifies the labeled input data table, which contains the labeled data observations. |
|
required parametertable |
— |
specifies the settings for an input table. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parametercasOut |
specifies the prediction results for semi-supervised learning. |
Parameter Descriptions
attributes=[{casinvardesc-1} <, {casinvardesc-2}, ...>]
alters attributes on variables used in this action.
For more information about specifying the attributes parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | attribute |
|---|
freq="variable-name"
Specifies the variable for the freq parameter
gamma=double
specified the inverse of variance for Gaussian kernels, which computes the similarity between pairs of data samples.
| Default | 20 |
|---|---|
| Minimum value (exclusive) | 0 |
inputs=[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies variables to use for analysis.
For more information about specifying the inputs parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | input |
|---|
k=integer
specified the number of nearest neighbors used.
| Default | 1 |
|---|---|
| Minimum value (exclusive) | 0 |
* labeledTable={castable}
specifies the labeled input data table, which contains the labeled data observations.
| Long form | labeledTable={"name":"table-name"} |
|---|---|
| Shortcut form | labeledTable="table-name" |
| Alias | labels |
|---|
The castable value can be one or more of the following:
"caslib":"string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
"computedOnDemand":True | False
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | False |
"computedVars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of the format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"computedVarsProgram":"string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
"dataSourceOptions":{"key-1":{any-list-or-data-type-1} <, "key-2":{any-list-or-data-type-2}, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* "name":"table-name"
specifies the name of the input table.
"singlePass":True | False
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | False |
|---|
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of the format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the input data.
"whereTable":{groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
"casLib":"string"
specifies the caslib for the filter table. By default, the active caslib is used.
"dataSourceOptions":{adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* "name":"table-name"
specifies the name of the filter table.
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of the format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the data from the filter table.
maxIters=integer
specifies the maximum number iterations.
| Alias | maxIter |
|---|---|
| Default | 3 |
nominals=[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies nominal variables to use for analysis.
For more information about specifying the nominals parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | nominal |
|---|
outLabelProb=True | False
specifies the output data table to restore the label distributions
| Default | False |
|---|
output={outputStatement}
specifies the prediction results for semi-supervised learning.
For more information about specifying the output parameter, see the common outputStatement parameter (Appendix A: Common Parameters).
* table={castable}
specifies the settings for an input table.
| Long form | table={"name":"table-name"} |
|---|---|
| Shortcut form | table="table-name" |
The castable value can be one or more of the following:
"caslib":"string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
"computedOnDemand":True | False
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | False |
"computedVars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of the format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"computedVarsProgram":"string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
"dataSourceOptions":{"key-1":{any-list-or-data-type-1} <, "key-2":{any-list-or-data-type-2}, ...>}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* "name":"table-name"
specifies the name of the input table.
"singlePass":True | False
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | False |
|---|
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of the format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the input data.
"whereTable":{groupbytable}
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
"casLib":"string"
specifies the caslib for the filter table. By default, the active caslib is used.
"dataSourceOptions":{adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters}
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
"importOptions":{"fileType":"ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters}
specifies the settings for reading a table from a data source.
| Alias | import_ |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* "name":"table-name"
specifies the name of the filter table.
"vars":[{casinvardesc-1} <, {casinvardesc-2}, ...>]
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
"format":"string"
specifies the format to apply to the variable.
"formattedLength":integer
specifies the length of the format field plus the length of the format precision.
"label":"string"
specifies the descriptive label for the variable.
* "name":"variable-name"
specifies the name for the variable.
"nfd":integer
specifies the length of the format precision.
"nfl":integer
specifies the length of the format field.
"where":"where-expression"
specifies an expression for subsetting the data from the filter table.
target="variable-name"
specifies target variable to use for analysis.
weight="variable-name"
Specifies the variable for the weight parameter
labelSpread Action
Provides actions for semisupervised learning. DEPRECATION NOTICE: The labelSpread action has been deprecated beginning with the 2025.09 release.
Summary: Input and Output Tables
If a row includes a subparameter, you can specify the name, caslib, and so on in the subparameter. Otherwise, you can specify the name, caslib, and so on in the parameter.
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parameterlabeledTable |
— |
specifies the labeled input data table, which contains the labeled data observations. |
|
required parametertable |
— |
specifies the settings for an input table. |
|
Parameter |
Subparameter |
Description |
|---|---|---|
|
required parametercasOut |
specifies the prediction results for semi-supervised learning. |
Parameter Descriptions
attributes=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
alters attributes on variables used in this action.
For more information about specifying the attributes parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | attribute |
|---|
freq="variable-name"
Specifies the variable for the freq parameter
gamma=double
specified the inverse of variance for Gaussian kernels, which computes the similarity between pairs of data samples.
| Default | 20 |
|---|---|
| Minimum value (exclusive) | 0 |
inputs=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies variables to use for analysis.
For more information about specifying the inputs parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | input |
|---|
k=integer
specified the number of nearest neighbors used.
| Default | 1 |
|---|---|
| Minimum value (exclusive) | 0 |
* labeledTable=list(castable)
specifies the labeled input data table, which contains the labeled data observations.
| Long form | labeledTable=list(name="table-name") |
|---|---|
| Shortcut form | labeledTable="table-name" |
| Alias | labels |
|---|
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions=list(key-1=list(any-list-or-data-type-1) <, key-2=list(any-list-or-data-type-2), ...>)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable=list(groupbytable)
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions=list(adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the filter table.
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
maxIters=integer
specifies the maximum number iterations.
| Alias | maxIter |
|---|---|
| Default | 3 |
nominals=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies nominal variables to use for analysis.
For more information about specifying the nominals parameter, see the common casinvardesc parameter (Appendix A: Common Parameters).
| Alias | nominal |
|---|
outLabelProb=TRUE | FALSE
specifies the output data table to restore the label distributions
| Default | FALSE |
|---|
output=list(outputStatement)
specifies the prediction results for semi-supervised learning.
For more information about specifying the output parameter, see the common outputStatement parameter (Appendix A: Common Parameters).
* table=list(castable)
specifies the settings for an input table.
| Long form | table=list(name="table-name") |
|---|---|
| Shortcut form | table="table-name" |
The castable value can be one or more of the following:
caslib="string"
specifies the caslib for the input table that you want to use with the action. By default, the active caslib is used. Specify a value only if you need to access a table from a different caslib.
computedOnDemand=TRUE | FALSE
when set to True, creates the computed variables when the table is loaded instead of when the action begins.
| Alias | compOnDemand |
|---|---|
| Default | FALSE |
computedVars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the names of the computed variables to create. Specify an expression for each variable in the computedVarsProgram parameter. If you do not specify this parameter, then all variables from computedVarsProgram are automatically included.
| Alias | compVars |
|---|
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
computedVarsProgram="string"
specifies an expression for each computed variable that you include in the computedVars parameter.
| Alias | compPgm |
|---|
dataSourceOptions=list(key-1=list(any-list-or-data-type-1) <, key-2=list(any-list-or-data-type-2), ...>)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the input table.
singlePass=TRUE | FALSE
when set to True, does not create a transient table on the server. Setting this parameter to True can be efficient, but the data might not have stable ordering upon repeated runs.
| Default | FALSE |
|---|
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variables to use in the action.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the input data.
whereTable=list(groupbytable)
specifies an input table that contains rows to use as a WHERE filter. If the vars parameter is not specified, then all the variable names that are common to the input table and the filtering table are used to find matching rows. If the where parameter for the input table and this parameter are specified, then this filtering table is applied first.
The groupbytable value can be one or more of the following:
casLib="string"
specifies the caslib for the filter table. By default, the active caslib is used.
dataSourceOptions=list(adls_noreq-parameters | bigquery-parameters | cas_noreq-parameters | clouddex-parameters | db2-parameters | dnfs-parameters | esp-parameters | fedsvr-parameters | gcs_noreq-parameters | hadoop-parameters | hana-parameters | impala-parameters | informix-parameters | jdbc-parameters | mongodb-parameters | mysql-parameters | odbc-parameters | oracle-parameters | path-parameters | postgres-parameters | redshift-parameters | s3-parameters | sapiq-parameters | sforce-parameters | singlestore_standard-parameters | snowflake-parameters | spark-parameters | spde-parameters | sqlserver-parameters | ss_noreq-parameters | teradata-parameters | vertica-parameters | yellowbrick-parameters)
specifies data source options.
| Aliases | options |
|---|---|
| dataSource |
For more information about specifying the dataSourceOptions parameter, see the common dataSourceOptions parameter (Appendix A: Common Parameters).
importOptions=list(fileType="ANY" | "AUDIO" | "AUTO" | "BASESAS" | "CSV" | "DOCUMENT" | "DTA" | "ESP" | "EXCEL" | "FMT" | "HDAT" | "IMAGE" | "JMP" | "LASR" | "PARQUET" | "SPSS" | "VIDEO" | "XLS", fileType-specific-parameters)
specifies the settings for reading a table from a data source.
| Alias | import |
|---|
For more information about specifying the importOptions parameter, see the common importOptions parameter (Appendix A: Common Parameters).
* name="table-name"
specifies the name of the filter table.
vars=list( list(casinvardesc-1) <, list(casinvardesc-2), ...>)
specifies the variable names to use from the filter table.
The casinvardesc value can be one or more of the following:
format="string"
specifies the format to apply to the variable.
formattedLength=integer
specifies the length of the format field plus the length of the format precision.
label="string"
specifies the descriptive label for the variable.
* name="variable-name"
specifies the name for the variable.
nfd=integer
specifies the length of the format precision.
nfl=integer
specifies the length of the format field.
where="where-expression"
specifies an expression for subsetting the data from the filter table.
target="variable-name"
specifies target variable to use for analysis.
weight="variable-name"
Specifies the variable for the weight parameter